How to Install Wallpaper with Glue

Installing wallpaper is an easy way to update the look of any room. Wallpaper can be installed using glue, making for a more permanent solution than self-adhesive wallpaper. Following these steps will help to ensure a successful installation.

Step 1: Prepare the Wall

Before installing the wallpaper, the wall must be prepared. This includes cleaning the surface, removing any old wallpaper, and filling any holes or cracks. Once the wall is prepped, it should be primed so the wallpaper will adhere properly.

Step 2: Cut the Wallpaper

Measure the wall and cut the wallpaper accordingly. It is best to cut the wallpaper a few inches larger than the wall to ensure a seamless look. Also, make sure to leave extra wallpaper at the top and bottom of the wall to allow for trimming.

Step 3: Apply the Glue

Mix the wallpaper glue according to the instructions on the package. Using a roller or brush, apply the glue to the wall. Make sure to spread the glue evenly and cover the entire wall. Allow the glue to dry for the amount of time specified on the package.

Step 4: Hang the Wallpaper

Once the glue is dry, begin hanging the wallpaper. Start in the upper left corner and work your way across the wall. Use a smoothing tool to remove any air bubbles and ensure a smooth finish. Allow the wallpaper to dry for the amount of time specified on the package.

Step 5: Trim the Excess

Once the wallpaper is dry, trim the excess along the top and bottom of the wall. Use a sharp utility knife and a ruler to get a straight edge. Once the excess is trimmed, the wallpaper installation is complete.